Smart Tips For Finding Wood

Timber Protection

The study of wood as a renewable material and organic material is what is known as wood science. In other words, the term wood science can also be known as wood technology. To be able to study wood it has to be compared to other products. Materials properties, ease of it being worked on and its value are among the few properties which are compared against those of wood and other materials. The many Merits of timber and these technologies improve wood to be superior over other products. Some of these advantages include wood being a versatile material that can be used in a wide range of products. Wood is renewable, and this makes it more precious. All the parts of wood can be put into use, and this makes it a better fit than other materials which most of their byproducts are a waste.

The good appearance of your timber made structure cannot be guaranteed if protection of the timber is not done. This protection is from moisture and insects which are the biggest threat to wood. The moisture courses the timber to decay and the insects eat through the wood. Many methods are available in the treatment of wood one of the most common being the ACQ – alkaline copper Quaternary. As the name implies the preservative is made of copper products. There are a few disadvantages of this method as a mode of wood preservation. The chemical is highly corrosive to most metals, the chemical corrodes away galvanized fasteners and therefore only stainless steel is used. The saturation level of any treatment will depend on where the wood is going to be used and the species of the wood. The concentration level of the chemical will be different for two pieces of wood where one is used above ground and the other close to a water body.

The use of copper metal is another method of wood treatment that is fast being accepted. The use of this method is fast being accepted because it is not corroding the metal fasteners. Micronized copper wood preservative is the correct term to refer this type of preservation. The copper metal is applied to the wood as small microscopic particles injected into the wood at high pressure. The process eliminates the need to dissolve the copper as is done in earlier copper-based preservatives. This process is highly effective and the wood properties and heightened. The wood products protected using this method last longer.

Termites cannot eat through timber treated through this method. Unlike other methods of treatment this method is not corrosive. When you use this method to treat wood, then you will not need to worry for at least ten years.